- We mainly manufacture chain link dog cages, square tube dog cages, dog fences, dog running cages etc.
- We have a professional designer who can design the dog cages according to your market.
- Our primary markets are the USA, Canada, UK, Poland, Australia, Malaysia, Indonesia, Philippines, India etc.
Gate Latch
![]() DKGL-01: Dog kennel gate latch. |
![]() DKGL-02: Kennel gate latch for a single gate. |
Gate Hinges
Chain link dog kennel gate hinges are designed for a tight fit. The tighter the spacing between the frame and the gate, the less chance of escaping for your pets. Unlike standard hinges, including female and male hinges, this kennel hinge eliminates the female hinge by bolting the strap portion to the frame and fitting the male portion into the gate. Another critical difference is that the space between hinge and frame is much shorter than standard hinges. with 2 kennel hinges per gate at the top and bottom. Kennel hinges are only used for 1-3/8″ pipe. 3/8″ × 2″ carriage bolts are included.
Product description:
- Item: dog kennel hinge.
- Material: pressed steel.
- Pipe: 1-3/8 in.
- Hardware: 3/8″ × 2″ carriage bolts.
- Finish: hot-dip galvanization.

DKH-02: Welded wire mesh kennel gate hinge.
dog kennel chain link Saddle Clamps
dog kennel chain link saddle clamps or panel clamps are used to secure two panels together. They are widely used in installing a dog kennel and temporary panels. Available for the pipe with 1-3/8, 1-5/8 and 2-inch outside diameter. One set of carriage bolts and nuts is required.
Product description:
- Item: dog kennel panel saddle clamp.
- Material: galvanized press steel.
- Pipe size: 1-3/8, 1-5/8 and 2 in.
- Carriage bolt: 5/16″ × 1-1/4″.

DKPC-02: Saddle clamps connecting two chain-link panels.
-
Item: dog kennel gate latch.
-
Material: pressed steel.
-
Post side: 1-3/8 in.
-
Gate frame: 1-3/8 in.
-
Finish: hot-dip galvanization.
Specification of dog kennel chain link
dog kennel chain link specification not listed the following we accept ODM and OEM supplies
material
|
low carbon steel wire
|
Wire diameter
|
2-4mm
|
hole size(mm)
|
50x50mm,60x60mm,70x70mmetc.
|
kennel size
|
2x2x1.8m,2x2x2m, 2.4x3x2metc.
|
frame pipe
|
O.D.25mm,O.D.32mm,O.D.38mm
|



Reviews
There are no reviews yet.